Today's Friday!
I had a bit of alcohol... but I'm in the mood of posting. I may make lots of mistakes on glamor, no, grammar.
Assembling the dashboard.
I thought and thought... and I decided to use Revell's dashboard,
because the 3 meter's (fuel, temperatures) atmosphere seemed better and I
thought that Fujimi's meters couldn't be modified easily on that part.
Firstly, I sanded the meter cover (over the console) to round shape.
I dug the hall on console panel. The outlets of air conditioner on right and left were dug by the scraper (free hand was the best way). PE from Fujimi's box will be used on 3 outlets on centre (you can see on the left one).
For the digging, I usually use these kind of tools. Left one is Hasegawa's scraper and right is rotary tool (0.5mm drill attached).
Left bottom is Fujimi's PE, centre is Fujimi's meter panel (holes applied) and right one is 0.3mm plastic paper (Revell's meter decals were cut and applied; ). Between the PE and meter panel, I applied 0.3mm clear plastic board. I used the clear bond (Konishi's "G clear") to glue these parts, because when I tried with CA glue, the clear parts went cloudy. I made lots of tries and errors here as well. :)
This was the result for meter panel. I like the colors on Revell's decals (the famous "red on black"). I got headache after cutting and applying these tiny small decals on panel.
The white parts are from Hasegawa's 328GTB.... I decided to use the handle stay (on the right) because the chassis plate was molded on it. I'll somehow make it up when I make 328GTB... Now is the time to concentrate to 288GTO.
To fit Hasegawa's handle stay, holes were applied. You can see Holes, holes and holes.
I couldn't do this job without loupe. Under half is Revell's ('cause Revell has just under half. Why???) and the upper half was cut from Fujimi's decal. I could choose Fujimi's decal for whole, but again I didn't like its atmosphere. Besides, Fujimi's decal are too fragile for these works (If I put the decal coat, they won't fit to these small section). The color is different in upper and under, but I thought this was the best solution.
To fit Fujimi's meter panel into Revell's dashboard, it took looong time for adjustment.
Then the KA Model's flocking powder and enamel flat black + white + thinner was applied (the method was the same as the interior tub; before the last post). Maybe this looks a bit exaggerated, still I think it would be better than other ways of painting (of mine). Of course, this job had to be before applying decals on centre consoles....! The way you can do these kind of jobs much easier...
I chose Revell's steering wheel, just because it seemed cool to me. Revell's details are sometimes attractive, seeing the prancing horses, wipers, etc.
The centre aluminum (stainless steel?) section was thinned by rotary tool and sandpapers, and horn button was sanded away.
For the horn button, I used one of these.
I put 0.7mm brass tubes (black CA glue applied and shaped on top) as ｌevers. And, once again a hole was applied through the handle stay. I made the steering wheel steerable; not linked to the front wheels though.
I bought a red, polyester training shirt from K Mart ($8 only on bargain) for only this purpose. I maybe use this shirt for the seats as well. The white plate is from 0.5mm plastic boards; 2-ply.
The PE chassis plate is from Hobby Design (I couldn't find the right one, but still OK to me). I changed the shape on the lever on right; light witch, I reckon, from plastic rods. The rings on centre 3 meters were made from 0.3mm nickel silver; coiled and cut. Enamel clear was also applied on the meters.
The left side pocket was assembled with 0.3mm plastic papers, colored in flat red and attached.
The GTO logo on right is from Fujimi's box, applied with CA glue after being set in the right place.
Oh, you can't see from these pictures, but the key hole was from Fujimi's box. I'll treat the key holder (Fujimi's PE) during the body paint dries.
That's all for today:)
Have a nice weekend!!!
No comments:
Post a Comment